Medium Ice-O-Lator 38 Micron Bag

This Ice-o-lator Bag Medium is particularly suitable as an additional sieve for the Ice-o-lator Medium Set. With this sieve, the quality of the extract can be adjusted even more precisely. With a sieve thickness of 38mü and a diameter of 50cm, this bag is especially profitable for the indoor set. It is recommended to use several bags on top of each other, so that a qualitative filtration can be achieved. For the production of resinous extracts without much effort. Recommended accessories that are not included: - A kitchen strainer to separate the crystals so they can dry better. - Use a thermometer to get the optimal temperature for the Ice-O-Lator process. Application With Bubbleator: Fasten the Ice-o-lator Bags in a kettle. Place the finest mesh bag in the kettle first. Put the coarse mesh bag into the fine mesh bag and so on. Make sure that the coarsest bag is always on top. Wash the plant residues in the Bubbleator for 15 minutes. (you can also make 2-3 passes, e.g. 1. 5 minutes, 2. 15 minutes and 3. 30 minutes, so you get different qualities). Drain the water into the prepared kettle. First take out the coarse bag and squeeze out the water well. Put it into a separate kettle. Now take out the fine bag and squeeze out the water well. Remove the remaining extract and spread it on a clean, dry surface, as airy as possible. Allow the resin to dry for at least 48 hours. Taste always comes with time. You may also need the plant residue from the coarse sieve for further use. However, this has a lower purity. Without bubbleator: Prepare the bags as described above. Fill a separate kettle about halfway with cold water. Now pour about 2 kilos of crushed ice into the water. Add the plant debris to the water. Stir the water well and several times. You can also use a blender, as long as it does not puree the plant remains. Now pour the water into the prepared bag kettle and continue as described above.